Nesten ferdig med jobben. Merket at på høyre side passet 32mm mutteren fra hjullager-kittet (IL). Og på den andre siden passet 27mm mutteren. Akslingen har forskjellig diameter ved gjengene. I diffen passer den fint. Har ikke målt selve akslingen enda.
Noe å bry seg om? Tipper Autolink har sendt meg en fra en 96 modell og en fra en 99 ?
Torsen swap. Ulike akslinger
Moderator: Styremedlemmer
Re: Torsen swap. Ulike akslinger
Svar fra Autolink:
It is not a problem, for some reason Mazda had 2 different threads on the outer ends of the driveshafts, everything else about them is the same. That's why you get 2 different nuts with the wheel bearing kit as there is no way of telling which nut is going to be fitted. Torque settings are the same.
It is not a problem, for some reason Mazda had 2 different threads on the outer ends of the driveshafts, everything else about them is the same. That's why you get 2 different nuts with the wheel bearing kit as there is no way of telling which nut is going to be fitted. Torque settings are the same.
1990 1.6
